Metoda de testare pentru frecarea și uzura ambreiajului motocicletei
Generally, the basic requirements for laboratory sample test methods are: ①simulation, the test data requirements are consistent with the road test or bench test results; ②sensitivity, when the composition and process of the tested material change, the performance will change slightly. ③Reproducibility, when the same material is tested under the same conditions, the data obtained should be the same. Among the above three requirements, one requires the determination of very important test conditions: At the same time, the actual operating conditions of motorcycle clutches are mainly considered as the main basis for determining the test conditions.
Din perspectiva mișcării relative, procesul de angrenare a ambreiajului poate fi considerat ca fiind apropiat de procesul de frânare. Ambele sunt la început când există o diferență de viteză între master și următor, iar apoi diferența de viteză este zero. Mașina de testare MM-1000 dezvoltată de noi în China poate fi folosită pentru testarea umedă. Această mașină este în prezent recunoscută ca o mașină de testare cu performanțe bune de simulare, sensibilitate și reproductibilitate în industria materialelor de frecare internă.
Determinarea presiunii specifice testului:
Presiunea de lucru se referă la forța de presare pe unitatea de suprafață de frecare a căptușelii atunci când ambreiajul este cuplat. Presiunea specifică de lucru a perechii de frecare ambreiaj a principalelor modele de motociclete din țara mea este de aproximativ {{0}}.3MPa, așa că această metodă de testare folosește trei presiuni specifice de 0,2 0,3 0,5 MPa, acoperind toate modelele de motociclete ambreiajele.